Автор Тема: NoxBit @ MIPSel  (Прочитано 12642 раз)

ViverraXX

  • Full Member
  • ***
  • Сообщений: 211
    • Просмотр профиля
Re: NoxBit @ MIPSel
« Ответ #165 : Сентябрь 27, 2017, 11:49:29 »
Всё равно не поможет. у меня ядро 3.4 Asus RT N56U. Noxbit работает но ни один канал не грузится.
Думаю, что если у этого процессора и есть запас, то незначительный, и при определенных условиях может возникнуть проблема с основным функционалом. Скорее-всего это тупиковое направление.

sashokmc

  • Hero Member
  • *****
  • Сообщений: 1071
    • Просмотр профиля
Re: NoxBit @ MIPSel
« Ответ #166 : Сентябрь 27, 2017, 12:37:41 »
Всё равно не поможет. у меня ядро 3.4 Asus RT N56U. Noxbit работает но ни один канал не грузится.
Думаю, что если у этого процессора и есть запас, то незначительный, и при определенных условиях может возникнуть проблема с основным функционалом. Скорее-всего это тупиковое направление.
Вот и я о чём. разумнее пилить Noxbit под ядра 2.6 для NAS.
BeeLine 70 мбит
Роутер Asus RT-N56U
LG 37LM620T, LG 32LF650V
Raspberry Pi 3 model B

vvkvvk

  • Newbie
  • *
  • Сообщений: 4
    • Просмотр профиля
Re: NoxBit @ MIPSel
« Ответ #167 : Сентябрь 27, 2017, 13:53:35 »
Жаль. Transmission работает неплохо на этом роутере. По-сути ведь похожие задачи.
NOXBIT под Raspberry PI B+
Ethernet 25/25 Мбит/с

serg600

  • Newbie
  • *
  • Сообщений: 1
    • Просмотр профиля
Re: NoxBit @ MIPSel
« Ответ #168 : Ноябрь 12, 2017, 01:27:19 »
Никаких новостей?..
Zyxel Keenetic Extra / WD My Cloud Gen1

bobbibob

  • Newbie
  • *
  • Сообщений: 1
    • Просмотр профиля
Re: NoxBit @ MIPSel
« Ответ #169 : Декабрь 09, 2017, 19:33:21 »
у меня даже запускаться не хочет. Пишет: /opt/noxbit/STM-Hypervisor: line 1: syntax error: unexpected word (expecting ")")
 в чем может быть причина?

uname -a
Linux openwrt 3.10.49 #6 Mon Jun 6 17:29:26 MSK 2016 rlx GNU/Linux
 cat /proc/cpuinfo
system type    : RTL819xD
machine      : Unknown
processor    : 0
cpu model    : 56322
BogoMIPS    : 657.40
tlb_entries    : 32
mips16 implemented  : yes
« Последнее редактирование: Декабрь 09, 2017, 22:47:46 от bobbibob »

Pepsik

  • Hero Member
  • *****
  • Сообщений: 1231
  • Лучшее - враг хорошего!
    • Просмотр профиля
Re: NoxBit @ MIPSel
« Ответ #170 : Февраль 07, 2018, 08:55:34 »
КРАЙНЯЯ ВЕРСИЯ ДЛЯ MIPSel
http://mytalks.ru/index.php?topic=6459.0
07-02-2018 05:52:58.183  16450 [STM-HYPER\main\1265] %HYPER-I: Rev: X.54-02/MIPSel, Starting ... (built  at Feb  3 2018 11:14:18 with CC 5.4.0 20160609)
ЗАПУСКАЕТСЯ И РАБОТАЕТ !
Linux Keenetic_Ultra 3.4.113 #1 SMP Fri Feb 2 23:15:29 MSK 2018 mips GNU/Linux
но не долго - http://mytalks.ru/index.php?topic=6588.msg80145#msg80145
« Последнее редактирование: Февраль 07, 2018, 09:49:59 от Pepsik »
https://t.me/AceStreamMOD
BTC:1J7YKUQ34mUsvXqLQ8aSWL2YtYHZX9RvbJ

dr. SysMan

  • Administrator
  • Hero Member
  • *****
  • Сообщений: 1072
  • BMF sys/net cheater
    • Просмотр профиля
    • NoxBit hot news
Re: NoxBit @ MIPSel
« Ответ #171 : Февраль 07, 2018, 22:22:00 »
Выкинул кит для MIPSel в канал телеграма.
Tox ID :
4C7CA6A2C5713FB948257C63FFEB485585D5DCF9BB9DEA7FB3847DADDB7271620F73C0DB30B1
Telegram:
Tech. support : https://t.me/Darth_SysMan
Channel: https://t.me/NoxBit

Pepsik

  • Hero Member
  • *****
  • Сообщений: 1231
  • Лучшее - враг хорошего!
    • Просмотр профиля
Re: NoxBit @ MIPSel
« Ответ #172 : Март 04, 2018, 11:13:17 »
Выкинул кит для MIPSel в канал телеграма.
Грустно....
-03-2018 08:11:35.988  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.988  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.988  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.988  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.988  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.988  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.988  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.988  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.988  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.988  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.989  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.989  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.989  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.989  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.989  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.989  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.989  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.989  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.989  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.989  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.989  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.989  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.989  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.989  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.989  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.989  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.989  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.989  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.989  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.989  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.989  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.989  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.990  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.990  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.990  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.990  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.990  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.990  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.990  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.990  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.990  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.990  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.990  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.990  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.990  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.990  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.990  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.990  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.990  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.990  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.990  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.990  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.990  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.991  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.991  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.991  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.991  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.991  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.991  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.991  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.991  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.991  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.991  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.991  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.991  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.991  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.991  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.991  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.993  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.994  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.994  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.994  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.994  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.994  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.994  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.994  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.994  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.994  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.994  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.994  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.994  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.994  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.994  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.994  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.994  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.994  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.994  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.994  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.994  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.994  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.994  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.994  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.994  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.995  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.995  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.995  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.995  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.995  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.995  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.995  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.995  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.995  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.995  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.995  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.995  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.995  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.995  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.995  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.995  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.995  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.995  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.995  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.995  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.995  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.996  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.996  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.996  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.996  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.996  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.996  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.996  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.996  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.996  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.996  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.996  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.996  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.996  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.996  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.996  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.998  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.999  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.999  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.999  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.999  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.999  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.999  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.999  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.999  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.999  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.999  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.999  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.999  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.999  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.999  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.999  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.999  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.999  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.999  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.999  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.999  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:35.999  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:35.999  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.000  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.000  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.000  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.000  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.000  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.000  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.000  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.000  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.000  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.000  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.000  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.000  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.000  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.000  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.000  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.000  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.000  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.000  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.000  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.000  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.000  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.001  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.001  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.001  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.001  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.001  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.001  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.001  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.001  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.001  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.001  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.001  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.001  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.001  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.001  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.001  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.001  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.001  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.004  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.004  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.005  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.005  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.005  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.005  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.005  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.005  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.005  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.005  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.005  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.005  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.006  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.006  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.006  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.006  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.006  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.006  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.006  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.006  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.006  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.006  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.006  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.007  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.007  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.007  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.007  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.007  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.007  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.007  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.007  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.007  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.007  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.007  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.007  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.008  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.008  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.008  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.008  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.008  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.008  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.008  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.008  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.008  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.008  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.009  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.009  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.009  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.009  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.009  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.009  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.009  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.009  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.009  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.009  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.009  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.010  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.010  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.010  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.010  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.010  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.010  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.010  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.010  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.010  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.010  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.010  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.011  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.011  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.011  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.011  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.011  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.011  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.011  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.011  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.011  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.011  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.011  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.012  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.012  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.012  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.012  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.012  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.012  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.012  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.012  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.012  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.012  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.012  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.013  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.013  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.013  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
04-03-2018 08:11:36.013  19577 [STM-DWNLD\signal_handler\231] %DWNLD-I: Recived signal 11, signo = 11, errno = 0, code=1, set exit_flag!
04-03-2018 08:11:36.013  19577 [STM-DWNLD\signal_handler\239] %DWNLD-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
И так ВЕЧНО ....
https://t.me/AceStreamMOD
BTC:1J7YKUQ34mUsvXqLQ8aSWL2YtYHZX9RvbJ

dr. SysMan

  • Administrator
  • Hero Member
  • *****
  • Сообщений: 1072
  • BMF sys/net cheater
    • Просмотр профиля
    • NoxBit hot news
Re: NoxBit @ MIPSel
« Ответ #173 : Март 04, 2018, 17:25:58 »
Можно вас попросить сделать запуск с trace?
Tox ID :
4C7CA6A2C5713FB948257C63FFEB485585D5DCF9BB9DEA7FB3847DADDB7271620F73C0DB30B1
Telegram:
Tech. support : https://t.me/Darth_SysMan
Channel: https://t.me/NoxBit

Pepsik

  • Hero Member
  • *****
  • Сообщений: 1231
  • Лучшее - враг хорошего!
    • Просмотр профиля
Re: NoxBit @ MIPSel
« Ответ #174 : Март 05, 2018, 19:48:51 »
Можно вас попросить сделать запуск с trace?
https://pastebin.com/raw/T6gVCebm
и так до бесконечности .....
https://t.me/AceStreamMOD
BTC:1J7YKUQ34mUsvXqLQ8aSWL2YtYHZX9RvbJ

miltador

  • Newbie
  • *
  • Сообщений: 24
    • Просмотр профиля
Re: NoxBit @ MIPSel
« Ответ #175 : Март 05, 2018, 22:00:18 »
То же что и у меня на ARM-e.

Pepsik

  • Hero Member
  • *****
  • Сообщений: 1231
  • Лучшее - враг хорошего!
    • Просмотр профиля
Re: NoxBit @ MIPSel
« Ответ #176 : Март 05, 2018, 22:38:02 »
То же что и у меня на ARM-e.
C arm - не подтверждаю там все "чики-пики" ... включая 64bit-ный вариант ...
Linux localhost 3.10.0 #1 SMP PREEMPT Tue Sep 20 12:56:05 CEST 2016 aarch64 GNU/Linux
https://t.me/AceStreamMOD
BTC:1J7YKUQ34mUsvXqLQ8aSWL2YtYHZX9RvbJ

Pepsik

  • Hero Member
  • *****
  • Сообщений: 1231
  • Лучшее - враг хорошего!
    • Просмотр профиля
Re: NoxBit @ MIPSel
« Ответ #177 : Март 10, 2018, 08:48:49 »
В версии для MIPSel на канале tlgrm от 09/03/18 - НОЛЬ изменений в работе лог точно такой же как и ранее http://mytalks.ru/index.php?topic=6459.msg80397#msg80397
« Последнее редактирование: Март 10, 2018, 10:28:27 от Pepsik »
https://t.me/AceStreamMOD
BTC:1J7YKUQ34mUsvXqLQ8aSWL2YtYHZX9RvbJ