Автор Тема: NoxBit под Linux  (Прочитано 86355 раз)

dr. SysMan

  • Administrator
  • Hero Member
  • *****
  • Сообщений: 1130
  • badass sys/net programmer
    • Просмотр профиля
    • NoxBit hot news
Re: NoxBit под Linux
« Ответ #960 : Сентябрь 29, 2018, 11:54:04 »
В телеграм-канал выдан кит для тестов.
Tox ID :
6BF43408EBAE3DF4540F0DF47B274DEAB8BC4E22F9BF1401020655E6C253675C44D81AD05157
Telegram:
Tech. support : https://t.me/broBudd
Channel: https://t.me/NoxBit

doc_bravn

  • Full Member
  • ***
  • Сообщений: 177
    • Просмотр профиля
Re: NoxBit под Linux
« Ответ #961 : Октябрь 03, 2018, 10:08:57 »
Какие там изменения? Что улучшено и справлено? Добавлены какие-то функции?
Intel Atom D410, 2GB, Ubuntu 18.04.1.
OrangePi PC, ARMv7, 1GB, Ubuntu 18.04.1.
CityLink >> DL100/UL100 Мбит/сек

sashokmc

  • Hero Member
  • *****
  • Сообщений: 1423
    • Просмотр профиля
Re: NoxBit под Linux
« Ответ #962 : Октябрь 03, 2018, 14:10:59 »
А под ARM версию нет. Нечего тестировать ;)
BeeLine 70 мбит
Роутер Asus RT-N56U
LG 37LM620T, LG 32LF650V
Raspberry Pi 3 model B

kursantkvi

  • Full Member
  • ***
  • Сообщений: 111
    • Просмотр профиля
Re: NoxBit под Linux
« Ответ #963 : Октябрь 03, 2018, 18:46:51 »
X64 так же нет ( если надо могу затестить x86
MGTS      ->|
SevenSky ->| -> CentOS 6.5 -> NoxBit -> VLC -> Multicast 
OnLime    ->|


(Orange PI + OpenELEC) * 4

sashokmc

  • Hero Member
  • *****
  • Сообщений: 1423
    • Просмотр профиля
Re: NoxBit под Linux
« Ответ #964 : Октябрь 03, 2018, 19:08:31 »
X64 так же нет ( если надо могу затестить x86
На канале видел X64-X86 версию
BeeLine 70 мбит
Роутер Asus RT-N56U
LG 37LM620T, LG 32LF650V
Raspberry Pi 3 model B

kursantkvi

  • Full Member
  • ***
  • Сообщений: 111
    • Просмотр профиля
Re: NoxBit под Linux
« Ответ #965 : Октябрь 03, 2018, 19:09:41 »
Спс. Выкачал с канала. Будем тестить
MGTS      ->|
SevenSky ->| -> CentOS 6.5 -> NoxBit -> VLC -> Multicast 
OnLime    ->|


(Orange PI + OpenELEC) * 4

getvitaminD

  • Newbie
  • *
  • Сообщений: 22
    • Просмотр профиля
Re: NoxBit под Linux
« Ответ #966 : Октябрь 08, 2018, 22:17:50 »
jessie, 8.4, vps

08-10-2018 22:12:34.451   6223 [STM-HYPER\main\1309] %HYPER-I: Rev: X.54-05/x86_64, Starting ... (built  at Sep 29 2018 11:47:59 with CC 7.3.0)

08-10-2018 22:12:44.222   6234 [STM-AGENT\sig_handler\1319] %AGENT-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
08-10-2018 22:12:44.222   6223 [STM-HYPER\signal_handler\359] %HYPER-I: Processing signal 17 from  PID=6234, si_code = 1, si_errno=0, si_signo = 17
08-10-2018 22:12:44.222   6223 [STM-HYPER\signal_handler\376] %HYPER-I: STM-Agent/STM-Movie has stopped with PID = 6234
08-10-2018 22:12:44.222   6223 [STM-HYPER\signal_handler\415] %HYPER-I: Send 'stop downloading' CID=81 (268 octets)
08-10-2018 22:12:44.222   6223 [STM-HYPER\signal_handler\425] %HYPER-I: Signal 17 from PID = 6234 processing finished.

 При етом Mar 3  работает без проблем
« Последнее редактирование: Октябрь 08, 2018, 22:36:48 от getvitaminD »

rirmak

  • Jr. Member
  • **
  • Сообщений: 79
    • Просмотр профиля
Re: NoxBit под Linux
« Ответ #967 : Январь 16, 2019, 17:32:09 »
jessie, 8.4, vps

08-10-2018 22:12:34.451   6223 [STM-HYPER\main\1309] %HYPER-I: Rev: X.54-05/x86_64, Starting ... (built  at Sep 29 2018 11:47:59 with CC 7.3.0)

08-10-2018 22:12:44.222   6234 [STM-AGENT\sig_handler\1319] %AGENT-I: Get the 11/b (Segmentation fault) signal, set exit_flag!
08-10-2018 22:12:44.222   6223 [STM-HYPER\signal_handler\359] %HYPER-I: Processing signal 17 from  PID=6234, si_code = 1, si_errno=0, si_signo = 17
08-10-2018 22:12:44.222   6223 [STM-HYPER\signal_handler\376] %HYPER-I: STM-Agent/STM-Movie has stopped with PID = 6234
08-10-2018 22:12:44.222   6223 [STM-HYPER\signal_handler\415] %HYPER-I: Send 'stop downloading' CID=81 (268 octets)
08-10-2018 22:12:44.222   6223 [STM-HYPER\signal_handler\425] %HYPER-I: Signal 17 from PID = 6234 processing finished.

 При етом Mar 3  работает без проблем
Сегодня скачал с канала  noxbit-pa-x86-64 от 29 сентября 2018
Запустить - запустилась (Ubuntu 18.04 server) только не пашет, поигрался 10 мин с конфигом пробовал разные варианты нефига не пашет.
Вернулся на старую у меня она от 13/02/2018 всё ок
З.Ы. Перешел заодно уже на версию от 3 марта всё ок
« Последнее редактирование: Январь 16, 2019, 18:04:57 от rirmak »
1)Samsung Smartы - у всех просмотр через Ottplayer.
2)Android -  Ip-Tv player
3) HTTPAceProxy(from Pepsik)+Acestreamengine 3.1.16 (x64 for ubuntu 16)+Ubuntu 18.04 LTE+канал 2Gbit/s.

sashokmc

  • Hero Member
  • *****
  • Сообщений: 1423
    • Просмотр профиля
Re: NoxBit под Linux
« Ответ #968 : Январь 17, 2019, 23:10:58 »
Всем привет. Запускаю тут Noxbit в Докере, что-то ничего не работает.
2102 root      0:00 /usr/bin/docker-proxy -proto tcp -host-ip 0.0.0.0 -host-port 6689 -container-ip 172.17.0.2 -container-port 6689Запускаю канал http://172.17.0.2:6689/stream?cid=91Ничего не происходит. и в логе тишина какая-то.
17-01-2019 20:05:00.273    189 [STM-HYPER\main\1268] %HYPER-I: Rev: X.54-03/ARMhf, Starting ... (built  at Feb 13 2018 23:06:36 with CC 5.4.0 20160609)
17-01-2019 20:05:00.275    189 [STARLET\__starlet$showparams\155] %UTILS-I: uid = *** (0x9616037)
17-01-2019 20:05:00.275    189 [STARLET\__starlet$showparams\163] %UTILS-I: pass[0:20] ='<password>'
17-01-2019 20:05:00.275    189 [STARLET\__starlet$showparams\159] %UTILS-I: bind[0:12] ='0.0.0.0:6689'
17-01-2019 20:05:00.275    189 [STARLET\__starlet$showparams\159] %UTILS-I: qi[0:41] ='50.7.141.10,185.74.223.182,185.74.223.183'
17-01-2019 20:05:00.276    189 [STARLET\__starlet$showparams\159] %UTILS-I: dir[0:11] ='/tmp/vcache'
17-01-2019 20:05:00.276    189 [STARLET\__starlet$showparams\155] %UTILS-I: keep = 67 (0x43)
17-01-2019 20:05:00.276    189 [STARLET\__starlet$showparams\151] %UTILS-I: trace = OFF
17-01-2019 20:05:00.276    189 [STARLET\__starlet$showparams\155] %UTILS-I: port_min = 6881 (0x1AE1)
17-01-2019 20:05:00.276    189 [STARLET\__starlet$showparams\155] %UTILS-I: port_max = 6889 (0x1AE9)
17-01-2019 20:05:00.276    189 [STARLET\__starlet$showparams\155] %UTILS-I: time_update = 7 (0x7)
17-01-2019 20:05:00.276    189 [STARLET\__starlet$showparams\155] %UTILS-I: delay = 5 (0x5)
17-01-2019 20:05:00.276    189 [STARLET\__starlet$showparams\159] %UTILS-I: logfile[0:0] =''
17-01-2019 20:05:00.276    189 [STARLET\__starlet$showparams\155] %UTILS-I: logsize = 0 (0x0)
17-01-2019 20:05:00.276    189 [STM-HYPER\main\1309] %HYPER-I: Executables : '/opt/noxbit'
17-01-2019 20:05:00.276    189 [STM-HYPER\main\1317] %HYPER-I: Cache dir path : '/tmp/vcache'
17-01-2019 20:05:00.280    189 [STM-HYPER\main\1325] %HYPER-S: Directory '/tmp/vcache' was created
17-01-2019 20:05:00.287    189 [STM-HYPER\start_downloader_process\688] %HYPER-S: /opt/noxbit/STM-Downloader was started with PID = 196, pipe_fd = 3 -> 4
17-01-2019 20:05:00.287    189 [STM-HYPER\downloader_monitor\723] %HYPER-S: Downloader monitor was started ...
17-01-2019 20:05:00.287    189 [STM-HYPER\create_and_listen\463] %HYPER-I: [#5] Init listener on  0.0.0.0:6689 ...
17-01-2019 20:05:00.287    189 [STM-HYPER\create_and_listen\484] %HYPER-S: [#5] Start listening on 0.0.0.0:6689
17-01-2019 20:05:00.436    196 [STM-DWNLD\main\938] %DWNLD-I: Rev: X.54-03/ARMhf, Starting ... (built  at Feb 13 2018 23:06:47 with CC 5.4.0 20160609)
17-01-2019 20:05:00.437    196 [STARLET\__starlet$showparams\159] %UTILS-I: host[0:41] ='50.7.141.10,185.74.223.182,185.74.223.183'
17-01-2019 20:05:00.437    196 [STARLET\__starlet$showparams\155] %UTILS-I: uid = 157376567 (0x9616037)
17-01-2019 20:05:00.437    196 [STARLET\__starlet$showparams\163] %UTILS-I: pass[0:20] ='<password>'
17-01-2019 20:05:00.437    196 [STARLET\__starlet$showparams\159] %UTILS-I: dir[0:11] ='/tmp/vcache'
17-01-2019 20:05:00.437    196 [STARLET\__starlet$showparams\155] %UTILS-I: pipe_fd = 4 (0x4)
17-01-2019 20:05:00.437    196 [STARLET\__starlet$showparams\155] %UTILS-I: keep = 67 (0x43)
17-01-2019 20:05:00.437    196 [STARLET\__starlet$showparams\151] %UTILS-I: trace = OFF
17-01-2019 20:05:00.437    196 [STARLET\__starlet$showparams\155] %UTILS-I: port_min = 6881 (0x1AE1)
17-01-2019 20:05:00.437    196 [STARLET\__starlet$showparams\155] %UTILS-I: port_max = 6889 (0x1AE9)
17-01-2019 20:05:00.437    196 [STARLET\__starlet$showparams\155] %UTILS-I: time_update = 7 (0x7)
17-01-2019 20:05:00.437    196 [STARLET\__starlet$showparams\159] %UTILS-I: peer_id[0:20] ='EC994CF2AA00F792STMH'
17-01-2019 20:05:00.437    196 [STARLET\__starlet$showparams\159] %UTILS-I: logfile[0:0] =''
17-01-2019 20:05:00.437    196 [STARLET\__starlet$showparams\155] %UTILS-I: logsize = 0 (0x0)
17-01-2019 20:05:00.437    196 [STARLET\__starlet$showparams\155] %UTILS-I: uprate = 0 (0x0)
17-01-2019 20:05:00.437    196 [STARLET\__starlet$showparams\155] %UTILS-I: downrate = 0 (0x0)
17-01-2019 20:05:00.437    196 [STARLET\__starlet$showparams\155] %UTILS-I: maxpeers = 0 (0x0)
17-01-2019 20:05:00.437    196 [STARLET\__starlet$showparams\155] %UTILS-I: presets = 0 (0x0)
17-01-2019 20:05:00.449    196 [STM-DWNLD\main\1016] %DWNLD-S: P2P session start listening on port: 6881
17-01-2019 20:05:00.450    196 [STM-DWNLD\main\1092] %DWNLD-I: Start listening on port: 6881, peer id  = 'EC994CF2AA00F792STMH', agent = 'StarLet-TV PA/X.54-03/ARMhf/built at Feb 13 2018 23:06:47'
BeeLine 70 мбит
Роутер Asus RT-N56U
LG 37LM620T, LG 32LF650V
Raspberry Pi 3 model B

sashokmc

  • Hero Member
  • *****
  • Сообщений: 1423
    • Просмотр профиля
Re: NoxBit под Linux
« Ответ #969 : Январь 18, 2019, 12:39:37 »
Интернет в контейнере есть, всё пингуется, а каналы по 172.17.0.2 не открывает.
Порты проброшены все. EXPOSE 6689 6881 6882 6883 6884 6885 6886 6887 6888 6889 6890 6891 6892 6893 6894 6895 6896 6897 6898 6899 6900
А в логе появилось вот что:
18-01-2019 09:34:29.113    196 [STM-DWNLD\main\1157] %DWNLD-I: 1146: portmap_error_alert 'could not map port using UPnP: no router found'
18-01-2019 09:34:29.113    196 [STM-DWNLD\main\1157] %DWNLD-I: 1146: portmap_error_alert 'could not map port using UPnP: no router found'
18-01-2019 09:34:29.113    196 [STM-DWNLD\main\1157] %DWNLD-I: 1146: portmap_error_alert 'could not map port using UPnP: no router found'
18-01-2019 09:34:29.113    196 [STM-DWNLD\main\1157] %DWNLD-I: 1146: portmap_error_alert 'could not map port using UPnP: no router found'
« Последнее редактирование: Январь 18, 2019, 12:59:37 от sashokmc »
BeeLine 70 мбит
Роутер Asus RT-N56U
LG 37LM620T, LG 32LF650V
Raspberry Pi 3 model B

dr. SysMan

  • Administrator
  • Hero Member
  • *****
  • Сообщений: 1130
  • badass sys/net programmer
    • Просмотр профиля
    • NoxBit hot news
Re: NoxBit под Linux
« Ответ #970 : Январь 19, 2019, 11:15:51 »
trace=ON .
Tox ID :
6BF43408EBAE3DF4540F0DF47B274DEAB8BC4E22F9BF1401020655E6C253675C44D81AD05157
Telegram:
Tech. support : https://t.me/broBudd
Channel: https://t.me/NoxBit

sashokmc

  • Hero Member
  • *****
  • Сообщений: 1423
    • Просмотр профиля
Re: NoxBit под Linux
« Ответ #971 : Январь 19, 2019, 12:33:06 »
trace=ON .
Вот с трассировкой Докер.
Версия от 9 марта 2018 из Телеги.
19-01-2019 09:29:24.666    188 [STM-HYPER\main\1311] %HYPER-I: Rev: X.54-04/ARMhf, Starting ... (built  at Mar  9 2018 16:22:02 with CC 5.4.0 20160609)
19-01-2019 09:29:24.668    188 [STARLET\__starlet$showparams\159] %UTILS-I: uid = *** (0x9616037)
19-01-2019 09:29:24.668    188 [STARLET\__starlet$showparams\167] %UTILS-I: pass[0:20] ='<password>'
19-01-2019 09:29:24.668    188 [STARLET\__starlet$showparams\163] %UTILS-I: bind[0:12] ='0.0.0.0:6689'
19-01-2019 09:29:24.668    188 [STARLET\__starlet$showparams\163] %UTILS-I: qi[0:41] ='50.7.141.10,185.74.223.182,185.74.223.183'
19-01-2019 09:29:24.668    188 [STARLET\__starlet$showparams\163] %UTILS-I: dir[0:11] ='/tmp/vcache'
19-01-2019 09:29:24.668    188 [STARLET\__starlet$showparams\159] %UTILS-I: keep = 67 (0x43)
19-01-2019 09:29:24.668    188 [STARLET\__starlet$showparams\155] %UTILS-I: trace = ON
19-01-2019 09:29:24.668    188 [STARLET\__starlet$showparams\159] %UTILS-I: port_min = 6881 (0x1AE1)
19-01-2019 09:29:24.668    188 [STARLET\__starlet$showparams\159] %UTILS-I: port_max = 6889 (0x1AE9)
19-01-2019 09:29:24.668    188 [STARLET\__starlet$showparams\159] %UTILS-I: time_update = 7 (0x7)
19-01-2019 09:29:24.669    188 [STARLET\__starlet$showparams\159] %UTILS-I: delay = 5 (0x5)
19-01-2019 09:29:24.669    188 [STARLET\__starlet$showparams\163] %UTILS-I: logfile[0:0] =''
19-01-2019 09:29:24.669    188 [STARLET\__starlet$showparams\159] %UTILS-I: logsize = 0 (0x0)
19-01-2019 09:29:24.669    188 [STM-HYPER\main\1352] %HYPER-I: Executables : '/opt/noxbit'
19-01-2019 09:29:24.669    188 [STM-HYPER\main\1360] %HYPER-I: Cache dir path : '/tmp/vcache'
19-01-2019 09:29:24.673    188 [STM-HYPER\main\1368] %HYPER-S: Directory '/tmp/vcache' was created
19-01-2019 09:29:24.680    188 [STM-HYPER\start_downloader_process\653] lsd = [3, 4]
19-01-2019 09:29:24.680    188 [STM-HYPER\start_downloader_process\698] %HYPER-S: /opt/noxbit/STM-Downloader was started with PID = 195, pipe_fd = 3 -> 4
19-01-2019 09:29:24.680    188 [STM-HYPER\downloader_monitor\733] %HYPER-S: Downloader monitor was started ...
19-01-2019 09:29:24.681    188 [STM-HYPER\create_and_listen\469] %HYPER-I: [#5] Init listener on  0.0.0.0:6689 ...
19-01-2019 09:29:24.681    188 [STM-HYPER\create_and_listen\490] %HYPER-S: [#5] Start listening on 0.0.0.0:6689
19-01-2019 09:29:24.829    195 [STM-DWNLD\main\940] %DWNLD-I: Rev: X.54-04/ARMhf, Starting ... (built  at Mar  9 2018 16:22:13 with CC 5.4.0 20160609)
19-01-2019 09:29:24.829    195 [STARLET\__starlet$showparams\163] %UTILS-I: host[0:41] ='50.7.141.10,185.74.223.182,185.74.223.183'
19-01-2019 09:29:24.829    195 [STARLET\__starlet$showparams\159] %UTILS-I: uid = *** (0x9616037)
19-01-2019 09:29:24.829    195 [STARLET\__starlet$showparams\167] %UTILS-I: pass[0:20] ='<password>'
19-01-2019 09:29:24.829    195 [STARLET\__starlet$showparams\163] %UTILS-I: dir[0:11] ='/tmp/vcache'
19-01-2019 09:29:24.829    195 [STARLET\__starlet$showparams\159] %UTILS-I: pipe_fd = 4 (0x4)
19-01-2019 09:29:24.829    195 [STARLET\__starlet$showparams\159] %UTILS-I: keep = 67 (0x43)
19-01-2019 09:29:24.829    195 [STARLET\__starlet$showparams\155] %UTILS-I: trace = ON
19-01-2019 09:29:24.829    195 [STARLET\__starlet$showparams\159] %UTILS-I: port_min = 6881 (0x1AE1)
19-01-2019 09:29:24.829    195 [STARLET\__starlet$showparams\159] %UTILS-I: port_max = 6889 (0x1AE9)
19-01-2019 09:29:24.829    195 [STARLET\__starlet$showparams\159] %UTILS-I: time_update = 7 (0x7)
19-01-2019 09:29:24.829    195 [STARLET\__starlet$showparams\163] %UTILS-I: peer_id[0:20] ='3C128C102D9110F0STMH'
19-01-2019 09:29:24.829    195 [STARLET\__starlet$showparams\163] %UTILS-I: logfile[0:0] =''
19-01-2019 09:29:24.829    195 [STARLET\__starlet$showparams\159] %UTILS-I: logsize = 0 (0x0)
19-01-2019 09:29:24.829    195 [STARLET\__starlet$showparams\159] %UTILS-I: uprate = 0 (0x0)
19-01-2019 09:29:24.829    195 [STARLET\__starlet$showparams\159] %UTILS-I: downrate = 0 (0x0)
19-01-2019 09:29:24.829    195 [STARLET\__starlet$showparams\159] %UTILS-I: maxpeers = 0 (0x0)
19-01-2019 09:29:24.829    195 [STARLET\__starlet$showparams\159] %UTILS-I: presets = 0 (0x0)
19-01-2019 09:29:24.829    195 [STM-DWNLD\main\986] DWNLD: Signal handler registered
19-01-2019 09:29:24.842    195 [STM-DWNLD\main\1020] %DWNLD-S: P2P session start listening on port: 6881
19-01-2019 09:29:24.843    195 [STM-DWNLD\main\1096] %DWNLD-I: Start listening on port: 6881, peer id  = '3C128C102D9110F0STMH', agent = 'StarLet-TV PA/X.54-04/ARMhf/built at Mar  9 2018 16:22:13'
19-01-2019 09:29:24.843    195 [STM-DWNLD\read_pipe\355] [#4] Waiting for CID ...
19-01-2019 09:29:24.844    195 [STM-DWNLD\downloader\812] %DWNLD-S: Downloader thread is starting ...
19-01-2019 09:29:26.847    195 [STM-DWNLD\main\1164] %DWNLD-I: 1121: listen_succeeded_alert 'successfully listening on [TCP] 0.0.0.0:6881'
19-01-2019 09:29:26.847    195 [STM-DWNLD\main\1164] %DWNLD-I: 1121: listen_succeeded_alert 'successfully listening on [TCP] [::]:6881'
19-01-2019 09:29:26.847    195 [STM-DWNLD\main\1164] %DWNLD-I: 1121: listen_succeeded_alert 'successfully listening on [UDP] 0.0.0.0:6881'
19-01-2019 09:32:01.094    195 [STM-DWNLD\main\1164] %DWNLD-I: 1146: portmap_error_alert 'could not map port using UPnP: no router found'
19-01-2019 09:32:01.094    195 [STM-DWNLD\main\1164] %DWNLD-I: 1146: portmap_error_alert 'could not map port using UPnP: no router found'
19-01-2019 09:32:01.094    195 [STM-DWNLD\main\1164] %DWNLD-I: 1146: portmap_error_alert 'could not map port using UPnP: no router found'
19-01-2019 09:32:01.094    195 [STM-DWNLD\main\1164] %DWNLD-I: 1146: portmap_error_alert 'could not map port using UPnP: no router found'
BeeLine 70 мбит
Роутер Asus RT-N56U
LG 37LM620T, LG 32LF650V
Raspberry Pi 3 model B

sashokmc

  • Hero Member
  • *****
  • Сообщений: 1423
    • Просмотр профиля
Re: NoxBit под Linux
« Ответ #972 : Январь 19, 2019, 12:51:57 »
Грешил на Openvpn клиент и гугл днс, всё отключил. перезагрузился. всё равно не играет каналы.
19-01-2019 09:47:52.652    188 [STM-HYPER\main\1311] %HYPER-I: Rev: X.54-04/ARMhf, Starting ... (built  at Mar  9 2018 16:22:02 with CC 5.4.0 20160609)
19-01-2019 09:47:52.654    188 [STARLET\__starlet$showparams\159] %UTILS-I: uid = *** (0x9616037)
19-01-2019 09:47:52.654    188 [STARLET\__starlet$showparams\167] %UTILS-I: pass[0:20] ='<password>'
19-01-2019 09:47:52.654    188 [STARLET\__starlet$showparams\163] %UTILS-I: bind[0:12] ='0.0.0.0:6689'
19-01-2019 09:47:52.654    188 [STARLET\__starlet$showparams\163] %UTILS-I: qi[0:41] ='50.7.141.10,185.74.223.182,185.74.223.183'
19-01-2019 09:47:52.654    188 [STARLET\__starlet$showparams\163] %UTILS-I: dir[0:11] ='/tmp/vcache'
19-01-2019 09:47:52.654    188 [STARLET\__starlet$showparams\159] %UTILS-I: keep = 67 (0x43)
19-01-2019 09:47:52.654    188 [STARLET\__starlet$showparams\155] %UTILS-I: trace = ON
19-01-2019 09:47:52.654    188 [STARLET\__starlet$showparams\159] %UTILS-I: port_min = 6881 (0x1AE1)
19-01-2019 09:47:52.654    188 [STARLET\__starlet$showparams\159] %UTILS-I: port_max = 6889 (0x1AE9)
19-01-2019 09:47:52.654    188 [STARLET\__starlet$showparams\159] %UTILS-I: time_update = 7 (0x7)
19-01-2019 09:47:52.654    188 [STARLET\__starlet$showparams\159] %UTILS-I: delay = 5 (0x5)
19-01-2019 09:47:52.654    188 [STARLET\__starlet$showparams\163] %UTILS-I: logfile[0:0] =''
19-01-2019 09:47:52.654    188 [STARLET\__starlet$showparams\159] %UTILS-I: logsize = 0 (0x0)
19-01-2019 09:47:52.655    188 [STM-HYPER\main\1352] %HYPER-I: Executables : '/opt/noxbit'
19-01-2019 09:47:52.655    188 [STM-HYPER\main\1360] %HYPER-I: Cache dir path : '/tmp/vcache'
19-01-2019 09:47:52.658    188 [STM-HYPER\main\1368] %HYPER-S: Directory '/tmp/vcache' was created
19-01-2019 09:47:52.664    188 [STM-HYPER\start_downloader_process\653] lsd = [3, 4]
19-01-2019 09:47:52.665    188 [STM-HYPER\start_downloader_process\698] %HYPER-S: /opt/noxbit/STM-Downloader was started with PID = 195, pipe_fd = 3 -> 4
19-01-2019 09:47:52.665    188 [STM-HYPER\downloader_monitor\733] %HYPER-S: Downloader monitor was started ...
19-01-2019 09:47:52.665    188 [STM-HYPER\create_and_listen\469] %HYPER-I: [#5] Init listener on  0.0.0.0:6689 ...
19-01-2019 09:47:52.665    188 [STM-HYPER\create_and_listen\490] %HYPER-S: [#5] Start listening on 0.0.0.0:6689
19-01-2019 09:47:52.813    195 [STM-DWNLD\main\940] %DWNLD-I: Rev: X.54-04/ARMhf, Starting ... (built  at Mar  9 2018 16:22:13 with CC 5.4.0 20160609)
19-01-2019 09:47:52.814    195 [STARLET\__starlet$showparams\163] %UTILS-I: host[0:41] ='50.7.141.10,185.74.223.182,185.74.223.183'
19-01-2019 09:47:52.814    195 [STARLET\__starlet$showparams\159] %UTILS-I: uid = **** (0x9616037)
19-01-2019 09:47:52.814    195 [STARLET\__starlet$showparams\167] %UTILS-I: pass[0:20] ='<password>'
19-01-2019 09:47:52.814    195 [STARLET\__starlet$showparams\163] %UTILS-I: dir[0:11] ='/tmp/vcache'
19-01-2019 09:47:52.815    195 [STARLET\__starlet$showparams\159] %UTILS-I: pipe_fd = 4 (0x4)
19-01-2019 09:47:52.815    195 [STARLET\__starlet$showparams\159] %UTILS-I: keep = 67 (0x43)
19-01-2019 09:47:52.815    195 [STARLET\__starlet$showparams\155] %UTILS-I: trace = ON
19-01-2019 09:47:52.815    195 [STARLET\__starlet$showparams\159] %UTILS-I: port_min = 6881 (0x1AE1)
19-01-2019 09:47:52.815    195 [STARLET\__starlet$showparams\159] %UTILS-I: port_max = 6889 (0x1AE9)
19-01-2019 09:47:52.815    195 [STARLET\__starlet$showparams\159] %UTILS-I: time_update = 7 (0x7)
19-01-2019 09:47:52.815    195 [STARLET\__starlet$showparams\163] %UTILS-I: peer_id[0:20] ='EFE71A66A3596CEDSTMH'
19-01-2019 09:47:52.815    195 [STARLET\__starlet$showparams\163] %UTILS-I: logfile[0:0] =''
19-01-2019 09:47:52.815    195 [STARLET\__starlet$showparams\159] %UTILS-I: logsize = 0 (0x0)
19-01-2019 09:47:52.815    195 [STARLET\__starlet$showparams\159] %UTILS-I: uprate = 0 (0x0)
19-01-2019 09:47:52.815    195 [STARLET\__starlet$showparams\159] %UTILS-I: downrate = 0 (0x0)
19-01-2019 09:47:52.815    195 [STARLET\__starlet$showparams\159] %UTILS-I: maxpeers = 0 (0x0)
19-01-2019 09:47:52.815    195 [STARLET\__starlet$showparams\159] %UTILS-I: presets = 0 (0x0)
19-01-2019 09:47:52.815    195 [STM-DWNLD\main\986] DWNLD: Signal handler registered
19-01-2019 09:47:52.827    195 [STM-DWNLD\main\1020] %DWNLD-S: P2P session start listening on port: 6881
19-01-2019 09:47:52.827    195 [STM-DWNLD\main\1096] %DWNLD-I: Start listening on port: 6881, peer id  = 'EFE71A66A3596CEDSTMH', agent = 'StarLet-TV PA/X.54-04/ARMhf/built at Mar  9 2018 16:22:13'
19-01-2019 09:47:52.828    195 [STM-DWNLD\read_pipe\355] [#4] Waiting for CID ...
19-01-2019 09:47:52.828    195 [STM-DWNLD\downloader\812] %DWNLD-S: Downloader thread is starting ...
19-01-2019 09:47:54.832    195 [STM-DWNLD\main\1164] %DWNLD-I: 1121: listen_succeeded_alert 'successfully listening on [TCP] 0.0.0.0:6881'
19-01-2019 09:47:54.832    195 [STM-DWNLD\main\1164] %DWNLD-I: 1121: listen_succeeded_alert 'successfully listening on [TCP] [::]:6881'
19-01-2019 09:47:54.832    195 [STM-DWNLD\main\1164] %DWNLD-I: 1121: listen_succeeded_alert 'successfully listening on [UDP] 0.0.0.0:6881'
19-01-2019 09:50:29.079    195 [STM-DWNLD\main\1164] %DWNLD-I: 1146: portmap_error_alert 'could not map port using UPnP: no router found'
19-01-2019 09:50:29.079    195 [STM-DWNLD\main\1164] %DWNLD-I: 1146: portmap_error_alert 'could not map port using UPnP: no router found'
19-01-2019 09:50:29.079    195 [STM-DWNLD\main\1164] %DWNLD-I: 1146: portmap_error_alert 'could not map port using UPnP: no router found'
19-01-2019 09:50:29.079    195 [STM-DWNLD\main\1164] %DWNLD-I: 1146: portmap_error_alert 'could not map port using UPnP: no router found'

Докерфайл
FROM lsiobase/alpine.armhf:3.8
RUN apk add --no-cache tar \
&& mkdir -p /opt/noxbit \
&& mkdir -p /dev/shm/noxbit \
&& wget -O /tmp/noxbit.tar.gz "https://dl.dropboxusercontent.com/s/h7n2k69yqsezj0y/noxbit-pa-ARMhf-32.tar.gz" \
&& tar xvzf /tmp/noxbit.tar.gz -C /opt/noxbit \
&& sed -i "s,-uid=999,-uid=yourself," /opt/noxbit/noxbit.cfg \
&& sed -i "s,-pass=KuC1w0n,-pass=yourself," /opt/noxbit/noxbit.cfg \
&& sed -i "s,!-trace,-trace," /opt/noxbit/noxbit.cfg \
&& rm -rf /tmp/* \
EXPOSE 6689 6881 6882 6883 6884 6885 6886 6887 6888 6889 6890 6891 6892 6893 6894 6895 6896 6897 6898 6899 6900
VOLUME /var/log
CMD /opt/noxbit/STM-Hypervisor -config=/opt/noxbit/noxbit.cfg
« Последнее редактирование: Январь 19, 2019, 13:05:34 от sashokmc »
BeeLine 70 мбит
Роутер Asus RT-N56U
LG 37LM620T, LG 32LF650V
Raspberry Pi 3 model B

dr. SysMan

  • Administrator
  • Hero Member
  • *****
  • Сообщений: 1130
  • badass sys/net programmer
    • Просмотр профиля
    • NoxBit hot news
Re: NoxBit под Linux
« Ответ #973 : Январь 20, 2019, 11:41:53 »
Не видно входящего соединения от проигрывателя на порт 6889.
Tox ID :
6BF43408EBAE3DF4540F0DF47B274DEAB8BC4E22F9BF1401020655E6C253675C44D81AD05157
Telegram:
Tech. support : https://t.me/broBudd
Channel: https://t.me/NoxBit

finnway

  • Newbie
  • *
  • Сообщений: 2
    • Просмотр профиля
Re: NoxBit под Linux
« Ответ #974 : Февраль 07, 2019, 17:51:46 »
Ubuntu 18.04/18.10 + Unity х64 прекрасно работает движок!
И с Gnome Shell, и в Linux Mint 18/19 тоже.
Тестил, и в Firefox, и в Google Chrome, и в Opera последних.
Прекрасно заводится.
Я ещё успел зарегиться на noxbit.com до того, как они закрыли регистрацию и в конфиге пишу свой UID и пароль и прекрасно работает по ним.
И, кстати, там же в личный кабинет даже вход есть, кто раньше зарегился, а регистрации так и нет. Не работает.
И по UID/пароль по умолчанию в конфиге, тоже заводится без проблем, единственное, это нельзя привязать Noxbit UID к аккаунту Торрент-ТВ.
Только зарегинные пользователи могут это сделать.
« Последнее редактирование: Февраль 07, 2019, 18:33:31 от finnway »